Peugeot – 306 Break (7E) – 1.8 (101 Hp) Full Specification

Peugeot - 306 Break (7E) - 1.8 (101 Hp)

Full Specification of Peugeot – 306 Break (7E) – 1.8 (101 Hp)

Name Peugeot – 306 Break (7E) – 1.8 (101 Hp)
Brand Peugeot
Model 306
Generation 306 Break (7E)
Modification (Engine) 1.8 (101 Hp)
Doors 5
Power 101 hp/6000 rpm.
Maximum speed 176 km/h
Acceleration 0 – 100 km/h 15.7 sec
100 km/h – 0
Fuel tank volume 60 l
Year of putting into production 1997 year
Year of stopping production 2000 year
Coupe type Combi
Seats 5
Model Engine
Length 4345 mm.
Width with Mirrors Folded
Width 1690 mm.
Width including Mirrors
Height 1410 mm.
Electric Motor Power
Electric Motor Torque
ICE Power
ICE Torque
Wheelbase 2580 mm.
Front Track 1460 mm.
Rear (Back) Track 1430 mm.
Drag Coefficient
Ride Height
Front Overhang
Rear Overhang
Wading Depth
Approach Angle
Departure Angle
Ramp Angle
Min Volume of Luggage (trunk) 440 l
Max Volume of Luggage (trunk) 1510 l
Battery Capacity
All-electric Range
Position of Engine Front, transversely
Engine Displacement 1762 cm3
Maximum Engine Speed
Torque 153 Nm/3000 rpm.
Fuel System Multi-point injection
Valvetrain OHC
Position of Cylinders Inline
Number of Cylinders 4
Number of Valves per Cylinder 2
Engine Oil Capacity
Cylinder Bore 83 mm.
Piston Stroke 81.4 mm.
Compression Ratio 9.3
Fuel Type Petrol (Gasoline)
Drive Wheel Front wheel drive
Number of Gears (Automatic Transmission) 4
Front Suspension Wishbone
Rear Suspension Trailing
Front Brakes Disc
Rear Brakes Drum
ABS yes
Steering Type Steering rack
Power Steering Hydraulic Steering
Minimum Turning Circle (Turning Diameter)
Fuel Consumption (Economy) – urban 12.9 l/100 km.
Fuel Consumption (Economy) – Extra Urban 6.9 l/100 km.
Fuel Consumption (Economy) – Combined
Emission Standard
CO2 Emissions
Kerb Weight 1185 kg.
Max. Weight 1645 kg.
Max. Roof Load
Permitted Trailer Load with Brakes (12%)
Permitted Trailer Load without Brakes
Permitted Towbar Download
Tire Size 185/65 R14
Wheel Rims Size

Add a Comment

Your email address will not be published. Required fields are marked *